Taking a break first shipping is Saturday 30th May
Comes in galvanised or powder coated
These posts come in three parts. Base plate, pole and clamp body.
Posts can be fitted in any good concrete base or flooring, but if you want to put your bins in the garden or on the driveway simply fit to a garden slab.
Options are pull one bin onto slab and secure or fit 1 bin, 2, 3 or 4 pole around slab and secure up to 4 bins.
Position flange centre in about 3 inches from the edge of slab
Drill into concrete with 8mm masonry drill
Insert pole on tighten 6mm Allan screw and tap up with hammer
Place clamp section on top again tap up with hammer.
Tighten 2 screws clamp section by hand. Don't over tighten as it is reinforced plastic tubing.
The clamp is made of 7 core wire two stainless steel bolts, inner plastic tube outer reinforced plastic tube, two hardened plastic couplings and stainless steel locks
The poles are made of 27mm outer diameter x 3mm wall thickness, base plate and T piece on clamp is galvanised casting.
If for some reason up want to make it difficult to tamper with Allan screws after assembly